How to Reset HY300 Projector (Step-by-Step for Common Issues)

• 4 min read
How to Reset HY300 Projector

If you’re searching for how to reset HY300 projector, chances are your device is freezing, apps aren’t loading correctly, Wi-Fi won’t connect, or the system feels sluggish. The good news is that in most cases, a reset can quickly restore performance without affecting hardware longevity.

This guide explains:

  • When to reset your HY300

  • The difference between a soft reset and factory reset

  • Step-by-step reset instructions

  • What to do if the projector won’t respond

  • How to set everything back up properly

All guidance below relates to Lumivision’s HY300 mini portable projector models used in bedroom, apartment, and travel setups.

Why You Might Need to Reset and How to Reset HY300 Projector

The HY300 is an Android-based mini portable projector designed for flexible home use — from a home cinema in a bedroom to projecting onto a ceiling while lying in bed.

Like any smart device, occasional software glitches can occur.

Common reasons to reset include:

  • Streaming apps freezing or crashing

  • Wi-Fi connection errors

  • Remote control not responding

  • System lag after firmware updates

  • Audio syncing issues

  • Device stuck on boot screen

Before assuming hardware failure, a reset is often the simplest solution.

According to testing observations, many compact Android-based projectors experience occasional software slowdowns due to app caching rather than hardware defects — which makes reset procedures a normal part of device maintenance.

Soft Reset vs Factory Reset: What’s the Difference?

Understanding the type of reset matters.

Soft Reset (Recommended First)

A soft reset simply restarts the projector.
It does not delete apps or settings.

This is ideal for:

  • Temporary freezing

  • Minor Wi-Fi dropouts

  • Audio sync issues

Factory Reset (Full Reset)

A factory reset restores the projector to original system settings.

It will erase:

  • Downloaded apps

  • Wi-Fi passwords

  • Account logins

  • Custom display settings

Use this only if persistent issues remain after a soft reset.

How to Reset HY300 Projector (Soft Reset Method)

Start here.

Method 1: Standard Restart via Menu

  1. Turn on the HY300 projector.

  2. Using the remote, navigate to Settings.

  3. Scroll to Device Preferences.

  4. Select Restart.

  5. Confirm.

The projector will power down and reboot automatically.

Allow 1–2 minutes for full system reload before testing apps again.

Method 2: Manual Power Cycle (If Frozen)

If the screen is stuck or remote won’t respond:

  1. Press and hold the Power button on the projector for 8–10 seconds.

  2. Wait until the unit shuts off completely.

  3. Unplug from power for 60 seconds.

  4. Reconnect and power on.

This clears temporary memory and often resolves app crashes.

How to Reset HY300 Projector (Factory Settings)

Only use this if problems continue.

Step-by-Step Factory Reset

  1. Open Settings

  2. Select Device Preferences

  3. Choose Reset

  4. Select Factory Data Reset

  5. Confirm twice

The device will erase system data and reboot.

Initial startup will look like first-time setup.

What If the HY300 Won’t Boot Properly?

If the projector:

  • Gets stuck on logo screen

  • Powers on but shows black display

  • Doesn’t respond to remote

Try this:

  1. Disconnect power completely.

  2. Hold the Power button while reconnecting.

  3. Release after 5–8 seconds.

If boot issues persist, check:

  • Power cable integrity

  • HDMI inputs

  • Overheating (allow cooling)

Re-Setting Up Your HY300 After Reset

After a factory reset, you’ll need to:

  • Reconnect to Wi-Fi

  • Log into streaming apps

  • Adjust focus and keystone

  • Set brightness and sound preferences

If you’re using the projector for a small room projector setup, placement and angle are just as important as system settings.

For detailed positioning advice, you can refer to our educational article on

👉 https://www.lumivision.com.au/blogs/news/how-to-set-up-hy300-projector-for-the-best-home-cinema-experience

This explains:

  • Throw distance

  • Wall vs ceiling projection considerations

  • Ideal placement for apartments

  • Optimising image clarity in compact spaces

Proper placement prevents unnecessary troubleshooting later.

Resetting for Specific Scenarios

Reset for Bedroom Use

If you’re using the HY300 as a projector for apartments or creating a home cinema in a bedroom, streaming app glitches are the most common issue.

Often caused by:

  • Background apps running

  • Low Wi-Fi signal

  • Storage full from cached data

A soft reset usually restores performance.

Reset for Ceiling Projection

If you’re projecting onto a ceiling and notice:

  • Auto-keystone misalignment

  • Image flipping issues

  • Display rotation errors

A restart can recalibrate sensors.

If errors persist, check orientation settings under:

Settings → Display → Projection Mode

Reset After Travel

As a mini portable projector, the HY300 is commonly used for:

  • Holidays

  • Caravan trips

  • Airbnb stays

Switching between networks frequently can cause saved Wi-Fi conflicts. A soft reset often restores connectivity.

Does Resetting Improve Picture Quality?

A reset does not directly improve brightness or native resolution.

However, it can:

  • Clear corrupted display settings

  • Fix colour profile errors

  • Restore default gamma settings

If your image still appears dim, check:

  • Ambient light levels

  • Projection surface colour

  • Distance from wall

For small rooms, shorter throw distance improves brightness density.

When NOT to Reset

Avoid unnecessary factory resets if:

  • HDMI device isn’t working (check cable first)

  • Soundbar isn’t connected (check audio output settings)

  • Blurry image (adjust focus wheel instead)

Resetting should be a troubleshooting tool, not a first reaction.

Preventing the Need for Frequent Resets

To maintain stable performance:

1. Keep Apps Updated

Outdated apps cause crashes.

2. Restart Weekly

A quick soft reset once a week clears background processes.

3. Avoid Overloading Storage

Don’t install unnecessary apps.

4. Maintain Ventilation

Overheating can cause temporary freezing.

Final Thoughts on How to Reset HY300 Projector

Understanding how to reset HY300 projector correctly can save time and prevent unnecessary support requests.

In most cases:

  • Start with a soft reset

  • Only use factory reset if needed

  • Re-optimise placement after reboot

The HY300 is designed for flexible everyday use — whether that’s wall viewing, projecting onto a ceiling, or setting up a compact cinema in a bedroom.

Resetting is simply part of smart device maintenance, not a sign of failure.

Australia HY300 HY300 Projector HY300 Smart Projector HY300Pro Lumivision Projector